recently, jingke energy and Australian customers formally signed a 72MW supply agreement , the project will all use TOPCon technology Tiger Neo 3.0 (flying tiger 3) components.
high efficiency and high power: reducing cost and increasing efficiency from the design side, making every inch of land more valuable
flying tiger 3 module is equipped with a new generation of TOPCon battery (efficiency up to 27%), and the front conversion efficiency exceeds 24.8 , monolithic components power up to 670W. Under the same installed scale, the BOS cost of about 8%-10% can be saved. If the land area is fixed, the installed capacity will be directly increased.
Australia is vast but project sites often involve ecological conservation or agricultural land, and efficient components mean less land disturbance and a higher return on investment. This account, the customer calculates equally accurately.
double-sided rate 85%: the back can also earn
the double-sided rate of flying tiger 3 reaches 85%±5%, which not only far exceeds the level of 70%-75% of BC components, but also exceeds the general level of TOPCon in the industry. On a typical Australian surface dominated by sand, light rocks and low vegetation, the back reflection gain is actually converted into integrated power. The comprehensive power of Flying Tiger 3 is 65-100W higher than that of BC component in the same gear. The same piece of sunshine, flying tiger 3 front and rear sides are working.
Higher power generation: not afraid of high temperature, not afraid of blocking
Australia has good sunshine, but it is also hot in summer. Once the component temperature coefficient is not good enough, power generation will be “discounted” at noon “. The temperature coefficient of flying tiger 3 is as low as -0.26/℃, the power loss under high temperature conditions above 40 ℃ is much lower than that of conventional components, and the power output is still full during the noon strong light period.
In addition, Flying Tiger 3 has the same excellent anti-shadow blocking ability. Whether it is bird droppings, fallen leaves or cloud shadows, the hot spot temperature is well controlled under partial occlusion, especially in long-side occlusion scenes, the performance of Flying Tiger 3 remains significantly ahead of similar products.
even in cloudy or cloudy days with low irradiance, the power generation advantage of flying tiger 3 is still stable at 2.26-2.49 (compared with BC component). From early morning to evening, from hot summer to cloudy, it has always been a steady force.
why TOPCon? Calculate the income account to understand
Jingke Energy’s global cumulative shipments have exceeded 400GW, of which Tiger Neo series has exceeded 200GW. Flying Tiger 3 can achieve cost of electricity (LCOE) optimization of more than 6%-this is not a technical concept, but a quantifiable increase in revenue, is the customer can count, get real money.
